Riddle me this...
 

Base Hardware:
ROG SWIFT PG278Q ( 3 monitors )
Asus RAMPAGE V EXTREME/U3.1
Intel® Core™ i7-5960X Processor Extreme Edition
(20M Cache, up to 3.50 GHz)
G.SKILL F4-2666C 15Q-32GRKB
Keyboard/Mouse
EVGA 1600w T2
Samsung 850 Evo 1TB (2 Drives)
Samsung SM951 PCIE M.2 SSD
Geforce GTX Titan X (4 pieces)
Riddle #1 (option 1)
Based on the 40 pcie lane availability on this cpu/mobo, option 1 is to run 3-way SLI and enable the ultra fast M.2 drive with raid 0 samsungs for storage.
Riddle #2 (option 2)
Based on the 40 pcie lane availability on the cpu/mobo, option 2 is to run Four way SLI, dump the ultra fast M.2 drive and be happy with a Raid 0 ssd array.

Note #1: 4-way sli on a 3 monitor surround does yield performance significant enough to consider with (depending on the driver version) a tiny bit of random issues.

Note #2: GPU/CPU will be covered in blocks which means 3 way GPU overclocking on water could bridge the 4-way performance gap.


Wuttayasay gents? Option 1 or 2?
Comments.

Option 1 seems like the easier way but still awesome!!

2.

4 card fun > hard drive fun.

Also, freeze em all.

Now that would be epic alright :happy2:

Quad SLI Awesomeness :)

Its not official unless you vote in the poll :P

Setting up Radiators
 

Setting up Rads, res inbound.
Attachment 7530

Passive cooling raddage, nice ;)

Which pumps are those? Are you using a separate psu for the water cooling?

Attachment 7542Attachment 7543Attachment 7541

Prolly order a bunch of those RIING fans (blue). Can't believe how small that res ended up being.

Separate psu for peripherals, ehiem pumps, ole skool with a K. :Hi:

Minions are everywhere. :scared:

Lookin' good. :thumbsup:

Pretty cool

My 6'5" Minion, hit him with the growth ray :gun12:

Rogue210 gettin minionized:

Attachment 7544

Exactly as I remember her... lol

ehiem pump, primoflex tubing, reservoir, radiators, watercooling
 

I think i settled in on a loop config...



Attachment 7568

Attachment 7567

Progress!! :good:

Does that temp probe cut in and out? I have 2 and they both do that. I'm pretty sure they are made by phobya.

Has worked flawlessly since 2009. Only goes down to -42c i think. U check the pins in the molex?

Looks like the 3-way poll won out.

Time to setup the Asus Rampage V Extreme X99 3.1 Mother of all boards (well most).

Attachment 7576


No 2011 mounting hardware so I'll have to use precision mounting with the Heatkiller 3.0 waterblock. Who the hell uses springs nowadays anyways?

Attachment 7577

I'm not sure on the longevity of liquid metal TIM but I'm sure of its ability to move heat quickly.

Attachment 7578

EDIT: I can say that when I opened a really old used pack of Liquid Metal, the applicator brush that I used still has some on it and it behaved/moved just as it did when I first applied it, no drying out or anything. Good indicator that it lasts quite a while.

Awesomesauce!!! :ola:

Samsung SM951 installed on Rampage V Extreme
 

My gosh this M.2 drive is teeny tiny.
Attachment 7584

Wonder if I should peel the stickers off and add thermal pads and a sliver hs
Attachment 7585

Super Storage Gaming!
Attachment 7586

Geforce Titan X Spiderman Drive By
 

Attachment 7590

KERSPLATT!!!!

Gonna Tri dis out in Geforce GTX Titan Tri-SLI first
 

Attachment 7591

Gpugators mount up!

Watercooling almost ready to get wet.
 

4 minute leak test approved
 

Attachment 7595
Nope, sprung a leak, lol, gotta love watercoolin.

Can't seem to get this M.2. SM951 setup properly here. Best consult an expert...
OCMAXIMUS!

Attachment 7596

I'll be there in 15 min..... weeee..... :green5:

I really like this picture. After all this time that Heat killer looks killah. The copper is simply stunning. :thumbsup:

Thx G-man.

Attachment 7599

Attachment 7600

Attachment 7601

Crazy looking set up

crazy ass M.s is screaming :-p

Thx Doc!
Gonna try out Raid 0 Samsung Evo' 1tb's next n see what "FEELS" snapyier.
Pretty sure I can run a onboard raid with 4 way SLI but not 100% certain on the PCIe lane dealios. I'll leave the m.2 installed with its os, install the fourth Titan w/b and the raid. When playing with m.2 I'll disable the 4 pcie card which will allow the m.2 to be recognized and just run 3-way with loop in tact. 4th gpu block can act as a rad, lololol.


Attachment 7602

You have inspired me to light up my rig. My rig is missing something and some soft lighting could do the trick.

Killah setup brodah! :thumbsup:

note: gpu core temps almost never exceed 40c @ +200 core +300 mems
BUT!!! the backplates gets hellishly scald the finger hot. GPU's run fine like that but i'm gonna spot fan it anyways. Kinda think the damn backplate needs a waterblock. Good grief cant imagine the heat that was being thrown off when i was just running the air coolers mashed together in 4-way. Will never do that again lol

rofl

I removed the EK tri-sli watercooling bridge from the waterblocks and installed the EK GTX Titan X Waterblock with Backplate on the fourth Geforce GTX Titan X.

I then installed two clear EK bridges on the two pair and slapped some Koolance Quick Disconnects all around. It will make removed and installing the cards a bit easier. Switching from SLI, TRI-SLI, 4-way is easy via the mother pci-e lane jumpers and switchin out SLI bridges.

This is no Marc MOLELLA case mod but it works for me.

Attachment 7670

Sick set up Kal,

Throw a rad in a bucket of ice water and lets see what it can do :)

http://hwbot.org/submission/2879631_..._x_33229_marks

lol i was expecting a link to a Witchdoctor submission not straight to the top of the heap K|ngp|n benchmark. FEVER! :)

LOL, don't have any quad results :shock:

Wuuuuut?!? lol, i'd rather drop down to single card than go head to head with Vince.

Attachment 7671

My wife bought me some lights online and asked if I could use them in the office. We had some fun foolin round with it.

Attachment 7672