Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Overclocking (http://www.overclockaholics.com/forums/forumdisplay.php?f=83)
-   -   Highest i7 HT Validations (http://www.overclockaholics.com/forums/showthread.php?t=886)

Cecil 07-22-2009 11:36 AM

Highest i7 HT Validations
 
Post your highest HT validations here. Air and water only.

Speed - CPU - BCLK - Multi - Vcore - Board - Mem - Mem Speed - Timings


http://valid.canardpc.com/cache/banner/602891.png

4803Mhz - 920 D0 - 229 - 21 - 1.55V - Asus R2E - Corsair XMS3 6gb - 1372Mhz - 8-8-8-24

Chuchnit 07-22-2009 12:07 PM

http://valid.canardpc.com/cache/banner/607060.png


4978mhz - W3580 - 160 - 31 - not sure - Classified 759 - Corsair Dom 1866 C9 - 803mhz - 7-8-7-21 1T

All on air. Megahalem for CPU/ stock air for the rest.

DrNip 07-22-2009 12:08 PM

AIR

4852.55 MHz - 920 D0 - 231.07 - 21 - 1.45ish - DFI UT - Hyper X 3GB - 693.2MHz - 8-8-8-24-1T

http://valid.canardpc.com/show_oc.php?id=558062

I can do better than this now I am sure. I will give it a go around again.

rickss69 07-22-2009 12:17 PM

It's a ploy guys...he's gonna make all you burn your stuff up so he can win the next contest. :rofl

Cecil 07-22-2009 12:30 PM

Quote:

Originally Posted by rickss69 (Post 10871)
It's a ploy guys...he's gonna make all you burn your stuff up so he can win the next contest. :rofl

Lol, you're too smart. You must now be annihilated.

rickss69 07-22-2009 12:33 PM

Quote:

Originally Posted by Cecil (Post 10872)
Lol, you're too smart. You must now be annihilated.

Sorry Bro...you know me....can't help myself. :D

Cecil 07-22-2009 10:05 PM

Hoping to have a DICE run this coming month. Aiming for 5.1Ghz.

Kal-EL 07-22-2009 11:48 PM

Quote:

Originally Posted by Cecil (Post 10959)
Hoping to have a DICE run this coming month. Aiming for 5.1Ghz.

Lets adjust that aim a bit shall we? 5.2ghz :D

Splave 07-23-2009 09:01 AM

some strong air/water clocks in this thread. Nice work guys

joe90br 10-30-2009 12:11 PM

Air - Thermalright Copper


4838.72 MHz - Xeon W3520 - 230.42 - 21 - 1.42 - EVGA Classified X58 - Crucial Ballistix Tracer 6GB - 691.2MHz - 9-9-9-27-1T

http://valid.canardpc.com/cache/banner/760725.png

http://valid.canardpc.com/show_oc.php?id=760725

Neuromancer 10-30-2009 12:24 PM

Wow, I gotta get me a classified board :p

ocgmj 10-31-2009 09:31 PM

SS

5288.18 MHz - i7 920 - 240.37 - 22 - 1.4875 - EVGA X58 758 - G.Skill PI Blacks 3GB - 961.5MHz - 9-9-9-24-1T

http://valid.canardpc.com/cache/banner/596542.png

punx223 10-31-2009 09:41 PM

Quote:

Originally Posted by ocgmj (Post 17159)
SS

5288.18 MHz - i7 920 - 240.37 - 22 - 1.4875 - EVGA X58 758 - G.Skill PI Blacks 3GB - 961.5MHz - 9-9-9-24-1T

http://valid.canardpc.com/cache/banner/596542.png

you cheat!!! it was air or water only.... still one hell of a run buddy

69_Goat 10-31-2009 10:02 PM

This was on cold water.

4901.88 MHz - i7 920 - 233.42 - 21 - 1.5187 - EVGA X58 Classified 760 - Patriot Viper 6GB - 933.7MHz - 8-8-8-20-1T

spfoam1 11-12-2009 04:21 PM

4900+ on air? Not on my chips. My i7s will make fine email rigs.

Splave 11-13-2009 06:22 AM

standard water, getting bored seeing what it would do bclk wise hence the x19 multi lol

4302mhz - w3570 - 226.5 - 19 - 1.425v - Classy 759 - hyperxT1 3gb - 905 7-8-7-21-1t
http://valid.canardpc.com/cache/banner/825228.png

Neuromancer 11-13-2009 07:38 AM

Quote:

Originally Posted by spfoam1 (Post 17733)
4900+ on air? Not on my chips. My i7s will make fine email rigs.

LOL Not on my setup either. I upgraded the board so I could pass 4.7. No luck

Oddly though this board is strong enough that I can run HTT on as high as I can with no HTT :ohcrap: Which is to say 220 BCLK booting. (221 and 222 in windows is doable 223 insta freeze)

Splave 11-13-2009 09:08 AM

what board you running? increase pci-e is what it sounds like it needs. Im at 107 atm

Neuromancer 11-13-2009 09:34 AM

E758, tried up to 110 PCIE no love. going to do some reading on the arch and figure out what is where and go from there see if it is possible to get it to happen or if a mod needs to be done

Off note, this board has some BIG ASS heatsinks on it, but they are not very effect. (With a 140 mm fan helping, the chipset and VRMs still run warmer than the CPU. So might have to tear it apart and fix it for EVGA :)

kikicoco1334 12-14-2009 05:35 PM

Speed - CPU - BCLK - Multi - Vcore - Board - Mem - Mem Speed - Timings
[4200MHz] - [920 D0] - [200] - [21] - [1.328] - [Gigabyte GA-EX58-UD4P] - [WINTEC AMPX 3x1GB 1333mhz] - [1200mhz] - [CL8 8-8-22]
http://hwbot.org/listResults.do?user...pplicationId=7
i am gettimg new ram in, viper 1600 8-8-8-2* and new videocard [my old one got rma-ed]
and on dec 20~21 i will be overclocking and i will post new score then

Cecil 12-24-2009 09:28 AM

Single 220 rad. No HT though, so this doesnt really count :blush:
4937Mhz - w3540 - 214.5 - 23 - 1.48 -Evga E758 - 6gb Kingston HyperX - 1716 - 9-9-9-27

kikicoco1334 12-25-2009 08:33 AM

Quote:

Originally Posted by kikicoco1334 (Post 19447)
Speed - CPU - BCLK - Multi - Vcore - Board - Mem - Mem Speed - Timings
[4200MHz] - [920 D0] - [200] - [21] - [1.328] - [Gigabyte GA-EX58-UD4P] - [WINTEC AMPX 3x1GB 1333mhz] - [1200mhz] - [CL8 8-8-22]
http://hwbot.org/listResults.do?user...pplicationId=7
i am gettimg new ram in, viper 1600 8-8-8-2* and new videocard [my old one got rma-ed]
and on dec 20~21 i will be overclocking and i will post new score then


[4515MHz] - [920 D0] - [215] - [21] - [1.376] - [Gigabyte GA-EX58-UD4P] - [Viper 1600 @ 8-8-8-24 T2 stock] - [1720mhz] - [CL8 7 7-20 T1] <- can prob push that a little bit higher with adding a little bit more vol on the chip :blush:
http://valid.canardpc.com/show_oc.php?id=897463

Kriztoffer 01-11-2010 12:25 PM

5027.22 - 920 D0 - 239.39 - x21 - 1.599v - Classified E760 - Dominator GT 2000Mhz CL8 - 718mhz - 8-8-8-24.

http://valid.canardpc.com/show_oc.php?id=776717

This was done on water. Xflow 240 BIX and a Apogee GTX.

ReverendMaynard 01-21-2010 06:20 AM

Water on the cpu only, GTX + Swiftech 240 w/ 2x Kaze Ultra 2000rpm full speed.

[4608.6mhz] - [920 C0] - [219] - [21] - [1.55v] - [eVGA -E758] - [G.Skill Pi Black 2000 @ 9-9-9-24 1T 1.69v] - [1755.6mhz] - [CL9 9 9-24 1T]

http://valid.canardpc.com/cache/banner/566811.png


All times are GMT -10. The time now is 03:35 AM.


Copyright ©2009 Overclockaholics.com