|
At least that is where it began it's life. It was led to my hands with just a small vision, a small vision that will hopefully turn into a huge piece of art! (emphasis on HUGE! lol)
CLICK ON ALL PHOTOS FOR A LARGER VIEW! So let us begin: The majority of these mods were to improve an already awesome case. It has been the greatest pleasure to work on, and I thoroughly enjoy this case. These mods were to improve functionality, and cosmetic appearance. While maintaining an overall theme, that will all be revealed in the end. http://i17.photobucket.com/albums/b5...h_DSC05486.jpg http://i17.photobucket.com/albums/b5...h_DSC05488.jpg http://i17.photobucket.com/albums/b5...h_DSC05489.jpg http://i17.photobucket.com/albums/b5...h_DSC05490.jpg Then I quickly got to work ripping out the front hard drive cage: http://i17.photobucket.com/albums/b5...h_DSC05495.jpg http://i17.photobucket.com/albums/b5...h_DSC05494.jpg http://i17.photobucket.com/albums/b5...h_DSC05493.jpg Then the reason for ripping that out, was to IMPROVE airflow! What does that best well yes of course a couple front fans! http://i17.photobucket.com/albums/b5...h_DSC05508.jpg http://i17.photobucket.com/albums/b5...h_DSC05509.jpg http://i17.photobucket.com/albums/b5...h_DSC05512.jpg and some sanding on the main frame, for prep and paint later. More pictures in the next few posts. Enjoy! Ok next step was to get to cutting out my Window mod to show off all that fancy new hardware! Let the cutting begin! http://i17.photobucket.com/albums/b5...h_DSC05874.jpg http://i17.photobucket.com/albums/b5...h_DSC05875.jpg http://i17.photobucket.com/albums/b5...h_DSC05876.jpg http://i17.photobucket.com/albums/b5...h_DSC05877.jpg http://i17.photobucket.com/albums/b5...h_DSC05878.jpg http://i17.photobucket.com/albums/b5...h_DSC05884.jpg You can see the first cut was rough, but right where I wanted it, after some sanding to get everything nice and smooth she look pretty again! :mrgreen: Next was to mod the inner trim, so that it would hold a piece of plexiglass nicely in place! Then cutting the plexiglass to fit in snug! :mrgreen: http://i17.photobucket.com/albums/b5...h_DSC05864.jpg http://i17.photobucket.com/albums/b5...h_DSC05865.jpg http://i17.photobucket.com/albums/b5...h_DSC05870.jpg http://i17.photobucket.com/albums/b5...h_DSC05871.jpg Once I got to this point, I realized that to get everything fitted as nice as I want it, and to give the inner look I am going for I needed to take it one step further. Yes this one is a little crazy but all will be revealed in the end. :bounce: :bounce: The cutting and the aftermath! http://i17.photobucket.com/albums/b5...h_DSC00914.jpg http://i17.photobucket.com/albums/b5...h_DSC00915.jpg http://i17.photobucket.com/albums/b5...h_DSC00918.jpg Finally the result! http://i17.photobucket.com/albums/b5...h_DSC00921.jpg http://i17.photobucket.com/albums/b5...h_DSC00928.jpg http://i17.photobucket.com/albums/b5...h_DSC01877.jpg You can also see the large hole in the top, for a little added cooling. ;) |
Paint
In the last couple pictures in the previous post, you can see some beginnings of some priming of the case. Now for some shots of the frame painted Satin Black, and some of the prepping and finalizing of the exterior pieces. http://i17.photobucket.com/albums/b5...h_DSC00924.jpg http://i17.photobucket.com/albums/b5...h_DSC00925.jpg http://i17.photobucket.com/albums/b5...h_DSC01883.jpg Here are some initial shots, and the mess my garage was in, also just moved. Had to organize the garage last night in order to be able to complete everything. http://i17.photobucket.com/albums/b5...h_DSC01886.jpg http://i17.photobucket.com/albums/b5...h_DSC01887.jpg http://i17.photobucket.com/albums/b5...h_DSC01888.jpg http://i17.photobucket.com/albums/b5...h_DSC01889.jpg http://i17.photobucket.com/albums/b5...h_DSC01891.jpg http://i17.photobucket.com/albums/b5...h_DSC01893.jpg http://i17.photobucket.com/albums/b5...h_DSC01894.jpg Here are some shots of the exterior plastics, base coated, wet sanded and ready for final painting. Also my Lamptron Fan controller painted: http://i17.photobucket.com/albums/b5...h_DSC01915.jpg http://i17.photobucket.com/albums/b5...h_DSC01922.jpg http://i17.photobucket.com/albums/b5...h_DSC01923.jpg http://i17.photobucket.com/albums/b5...h_DSC01924.jpg Hopefully will be back later with some final coat shots, and some other pictures! UPDATE 8-26-09 Ok few new pictures, got the supports for the motherboard tray in, and the hard drive mount made, so the hard drive will be vented underneath to keep it cool, and slide out the front for easy cable removal and hard drive swapping if necessary. Also got the front of the case modded, and that will get mounted up later. Will be sanding down the frame, and final painting hopefully finishing up today. Enjoy! http://i17.photobucket.com/albums/b5...h_DSC01925.jpg http://i17.photobucket.com/albums/b5...h_DSC01926.jpg http://i17.photobucket.com/albums/b5...h_DSC01927.jpg http://i17.photobucket.com/albums/b5...h_DSC01929.jpg http://i17.photobucket.com/albums/b5...h_DSC01931.jpg http://i17.photobucket.com/albums/b5...h_DSC01933.jpg http://i17.photobucket.com/albums/b5...h_DSC01936.jpg http://i17.photobucket.com/albums/b5...h_DSC01937.jpg http://i17.photobucket.com/albums/b5...h_DSC01938.jpg http://i17.photobucket.com/albums/b5...h_DSC01940.jpg http://i17.photobucket.com/albums/b5...h_DSC01941.jpg http://i17.photobucket.com/albums/b5...h_DSC01942.jpg UPDATE 8/29/09 Well I was unhappy with the paint on the chassis, so before final painting, I sand blasted most of the paint back off, and then sanded areas that needed it back down to the metal. Alot of areas where the filler primer was applied were only sanded flat, not down to bare metal, as to try and achieve the best possible finish. Enjoy the pictures! http://i17.photobucket.com/albums/b5...h_DSC01960.jpg http://i17.photobucket.com/albums/b5...h_DSC01961.jpg http://i17.photobucket.com/albums/b5...h_DSC01962.jpg http://i17.photobucket.com/albums/b5...h_DSC01963.jpg http://i17.photobucket.com/albums/b5...h_DSC01964.jpg http://i17.photobucket.com/albums/b5...h_DSC01965.jpg http://i17.photobucket.com/albums/b5...h_DSC01966.jpg http://i17.photobucket.com/albums/b5...h_DSC01967.jpg http://i17.photobucket.com/albums/b5...h_DSC01968.jpg I also finished the end caps for the front of the case, to finish off the area where the door would have once been installed. This way the airflow through the front fans is never restricted by the door, but the front of the case appears finished and not missing something. NOW I'M Happy with the paint!!! Enjoy the pictures, picking up some more hardware and finishing the painting up tomorrow!! http://i17.photobucket.com/albums/b5...h_DSC01992.jpg http://i17.photobucket.com/albums/b5...h_DSC01993.jpg http://i17.photobucket.com/albums/b5...h_DSC01994.jpg http://i17.photobucket.com/albums/b5...h_DSC01995.jpg http://i17.photobucket.com/albums/b5...h_DSC01996.jpg http://i17.photobucket.com/albums/b5...h_DSC01997.jpg http://i17.photobucket.com/albums/b5...h_DSC01998.jpg UPDATE 8/31/09 Ok have a few new paint shots, all the parts are painted. I have reconfigured how I am going to mount my harddrive, so that has been changed. That update will come as the main work on the case gets finished up and I get into the electrical work. Here are a couple paint shots, more will come later! http://i17.photobucket.com/albums/b5...h_DSC01999.jpg http://i17.photobucket.com/albums/b5...h_DSC02000.jpg http://i17.photobucket.com/albums/b5...h_DSC02010.jpg |
Polishing/Lapping
UPDATE 8/29/09 Our first signs of some polishing work. I have started lapping the heatsink for my CPU, but l et's get started with the case work first! These are the rails, that make the feet, and top handles on the Cosmos. They were originally painted silver, until I nicely sanded them down to bare, aluminum, yes aluminum :wink: After the first sanding with 220, then 400 then 600 then 800 then 1000 then 1500. Then hit with a very fine steel wool and some polishing compound, we get a nice mirrored finish, that will later be final buffed for a very high gloss. http://i17.photobucket.com/albums/b5...O/DSC01954.jpg http://i17.photobucket.com/albums/b5...O/DSC01955.jpg UPDATE 8/31/09 Ok guys, have all four bars sanded down, and 2 of them with some initialy polishing done. So here are a couple shots for your enjoyment! http://i17.photobucket.com/albums/b5...h_DSC02007.jpg http://i17.photobucket.com/albums/b5...h_DSC02008.jpg http://i17.photobucket.com/albums/b5...h_DSC02009.jpg http://i17.photobucket.com/albums/b5...h_DSC02010.jpg Through the polishing process, I started with 220grit on my mouse sander to knock off all the paint. Then I grabbed the following grits, 220, 400, 600, 800, 1000 and wet sanded until the previous grits scratches were gone. Then I hit it with a buffing wheel, and some black oxide polishing compound. I need to do some further polishing, and final polishing still but the above gives you a general idea. |
Electrical/Fans/Lighting
UPDATE 8-26-09 Ok what will control everything in the Case as far as fans go will be my Lamptron FC-2 Why did I buy a silver one and not a black one, well I got a good deal on it, and it was exactly what I wanted to get the look I wanted! Plus it let me take it apart! :wink: http://i17.photobucket.com/albums/b5...h_DSC01907.jpg http://i17.photobucket.com/albums/b5...h_DSC01908.jpg http://i17.photobucket.com/albums/b5...h_DSC01909.jpg http://i17.photobucket.com/albums/b5...h_DSC01910.jpg http://i17.photobucket.com/albums/b5...h_DSC01951.jpg http://i17.photobucket.com/albums/b5...h_DSC01953.jpg http://i17.photobucket.com/albums/b5...h_DSC01915.jpg UPDATE 9/3/09 Here we have some random shots of the fans. Very Cosmic looking. :wink: (get it "Cosmic") Also sleeved all the fan cables, even though most of them will not be visible, I know they are there! http://i17.photobucket.com/albums/b5...h_DSC02054.jpg http://i17.photobucket.com/albums/b5...h_DSC02055.jpg http://i17.photobucket.com/albums/b5...h_DSC02056.jpg http://i17.photobucket.com/albums/b5...h_DSC02057.jpg http://i17.photobucket.com/albums/b5...h_DSC02059.jpg http://i17.photobucket.com/albums/b5...h_DSC02064.jpg http://i17.photobucket.com/albums/b5...h_DSC02065.jpg http://i17.photobucket.com/albums/b5...h_DSC02069.jpg http://i17.photobucket.com/albums/b5...h_DSC02072.jpg http://i17.photobucket.com/albums/b5...h_DSC02078.jpg Here is a full size shot for the "fan"atics! LOLOLOLOL :wink: http://i17.photobucket.com/albums/b5...O/DSC02078.jpg Then a little video of the fans in action. I am getting a bit of a squeeling noise, the Lamptron fan controller is new to me, always used a Rheobus controller before, so I will lock this down eventually. This was just a test! http://i17.photobucket.com/albums/b5...h_MOV02099.jpg |
Hardware
UPDATE 9/3/09 The coveted, the almighty, yes the hardware, the heart and soul of the beast! In full res, just for you PaPang! :mrgreen: http://i17.photobucket.com/albums/b5...O/DSC02081.jpg http://i17.photobucket.com/albums/b5...O/DSC02082.jpg http://i17.photobucket.com/albums/b5...O/DSC02083.jpg http://i17.photobucket.com/albums/b5...O/DSC02084.jpg http://i17.photobucket.com/albums/b5...O/DSC02085.jpg http://i17.photobucket.com/albums/b5...O/DSC02086.jpg http://i17.photobucket.com/albums/b5...O/DSC02087.jpg http://i17.photobucket.com/albums/b5...O/DSC02088.jpg http://i17.photobucket.com/albums/b5...O/DSC02091.jpg http://i17.photobucket.com/albums/b5...O/DSC02095.jpg http://i17.photobucket.com/albums/b5...O/DSC02096.jpg http://i17.photobucket.com/albums/b5...O/DSC02097.jpg This was a test fit, to test the integrity of the motherboard tray and make sure that I was not going to get any flex, or if I was going to need to add more support. Everything seems rock solid! |
Final
|
Lighting
UPDATE 9/6/09 This will be made clear very shortly. Basically the case will have a couple different lighting effects, this is one of them, it's UV hence it does not show up very well in the video. :( If I could only explain how cool it looks when standing in front of it! :bounce: :bounce: :bounce: http://i17.photobucket.com/albums/b5...h_MOV02154.jpg http://i17.photobucket.com/albums/b5...O/DSC02146.jpg http://i17.photobucket.com/albums/b5...O/DSC02147.jpg http://i17.photobucket.com/albums/b5...O/DSC02149.jpg http://i17.photobucket.com/albums/b5...O/DSC02150.jpg http://i17.photobucket.com/albums/b5...O/DSC02151.jpg Enjoy the show, another video and more photos coming later tonight! Let me know what you guys think so far, I will be updating the posts above, with dates etc as you see above. I am also entering this in the COolermaster Case mod contest, will need your support over there when it comes to judging, which starts OCT 1st! |
For those of you who do not get Coolermaster's email's.
Check out this screenshot I took of the latest newsletter email: http://i17.photobucket.com/albums/b5...asteremail.jpg The first picture here is my Cosmos. I am entering in their Case Mod competition. I will need all your help when it comes to voting which starts Oct 1st! PAINT UPDATES, can only have 50 url's per post. :( UPDATE 9/3/09 Here are some more shots of the paint that were updated later down in the thread. http://i17.photobucket.com/albums/b5...h_DSC01999.jpg http://i17.photobucket.com/albums/b5...h_DSC02000.jpg http://i17.photobucket.com/albums/b5...h_DSC01991.jpg http://i17.photobucket.com/albums/b5...h_DSC01992.jpg http://i17.photobucket.com/albums/b5...h_DSC01993.jpg http://i17.photobucket.com/albums/b5...h_DSC01994.jpg http://i17.photobucket.com/albums/b5...h_DSC01995.jpg http://i17.photobucket.com/albums/b5...h_DSC01996.jpg http://i17.photobucket.com/albums/b5...h_DSC01997.jpg http://i17.photobucket.com/albums/b5...h_DSC01998.jpg Here are a few full size shots! http://i17.photobucket.com/albums/b5...O/DSC02053.jpg http://i17.photobucket.com/albums/b5...O/DSC02038.jpg http://i17.photobucket.com/albums/b5...O/DSC02034.jpg http://i17.photobucket.com/albums/b5...O/DSC02030.jpg http://i17.photobucket.com/albums/b5...O/DSC02027.jpg Let me know what you think! :D |
Awesome work Marcam!
Count me in for voiting I'll vote as much as I can! Good Luck!!! |
| All times are GMT -10. The time now is 09:30 PM. |
Copyright ©2009 Overclockaholics.com