Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   General Discussion (http://www.overclockaholics.com/forums/forumdisplay.php?f=2)
-   -   Evga X58....Dead (http://www.overclockaholics.com/forums/showthread.php?t=84)

Gutterz 03-06-2009 06:11 PM

Evga X58....Dead
 
My Evga X58 died tonight. Did a new OS install an installed the chipset drivers an it never booted again. The Post code is 7F which is a code for user intervention. Every time I hit F1 or Delete I'd get a new code.

I've swapped out VGA cards, tried individual ram sticks an broke the system down to what is needed to run no luck. Havent tried the psu thow.

The day before I kept getting a pop up saying that my chipset was not compatible to my OS which is vista 64. Then gives me a link to Intels site for a hotfix. When I ran the hotfix it said it wasnt for my system lol.

This will be the last Nvidia board I buy:mad:

Chuchnit 03-06-2009 06:59 PM

That suckos Gutter. Sounds like something got all screwed up there. X58 is an intel chipset btw. How were you running the board before this happened? Under the chiller or anything?

Gutterz 03-06-2009 07:56 PM

All stock settings. Didnt say it wasnt an Intel chipset. My hard drives were disappearing just before this happened also. Ill rebuild it out of a case tomorrow. Lots of posts here an there says it the Vga card seating. But I wasn't touching or moving anything just a restart.

Kal-EL 03-06-2009 08:15 PM

WOw Gutterz, that sucks. Seems the EX 58 was having lots o probs from the git go at launch. Maybe u can jump-grade to the classified next week monday.

Chuchnit 03-07-2009 01:10 AM

Quote:

Originally Posted by Gutterz (Post 229)
All stock settings. Didnt say it wasnt an Intel chipset. My hard drives were disappearing just before this happened also. Ill rebuild it out of a case tomorrow. Lots of posts here an there says it the Vga card seating. But I wasn't touching or moving anything just a restart.


Sorry Gutter. I know what you meant by nvidia board :rofl That truly sucks. Are you gonna RMA and hope you get a good board, or jump ship to a different brand?

Gutterz 03-07-2009 03:24 AM

Quote:

Originally Posted by Chuchnit (Post 233)
Sorry Gutter. I know what you meant by nvidia board :rofl That truly sucks. Are you gonna RMA and hope you get a good board, or jump ship to a different brand?

Want the RX2 but price is to high rite now. Mopar was showing me some youtube videos from shimano about the classified an well that thing looks like a nightmare. The ram slots are sloppy an wobble the stick an cause it to not boot,

DrNip 03-07-2009 03:49 AM

Nice to have you over at the sweetest forum on the web but shhty ordeal you got going there. Hopefully it is covered in the ECGA warranty.

Chuchnit 03-07-2009 04:00 AM

Quote:

Originally Posted by Gutterz (Post 236)
Want the RX2 but price is to high rite now. Mopar was showing me some youtube videos from shimano about the classified an well that thing looks like a nightmare. The ram slots are sloppy an wobble the stick an cause it to not boot,

Well it's only supposed to give an advantage under sub ambient temps. Plus you get the latency penalty from the nforce 200 chip. IMHO my choice for an i7 board would be between the Classified, REX II, or the DFI UT-X58. Out of those three I would still probably go with option 1 or 2.

Kal-EL 03-07-2009 04:03 AM

I gotta go with the classified just to butt heads with 2peakes as he says he'll wipe the floor with me if I use another Evga Board............................................i t's ONnnnnnnnnnnnnnnnnnn!:leghump:

Chuchnit 03-07-2009 04:04 AM

Quote:

Originally Posted by Kal-EL (Post 243)
I gotta go with the classified just to butt heads with 2peakes as he says he'll wipe the floor with me if I use another Evga Board............................................i t's ONnnnnnnnnnnnnnnnnnn!:leghump:

:broomstick:


All times are GMT -10. The time now is 10:56 AM.


Copyright ©2009 Overclockaholics.com