Polishing/Lapping
UPDATE 8/29/09
Our first signs of some polishing work.
I have started lapping the heatsink for my CPU, but l et's get started with the case work first!
These are the rails, that make the feet, and top handles on the Cosmos. They were originally painted silver, until I nicely sanded them down to bare, aluminum, yes aluminum :wink:
After the first sanding with 220, then 400 then 600 then 800 then 1000 then 1500. Then hit with a very fine steel wool and some polishing compound, we get a nice mirrored finish, that will later be final buffed for a very high gloss.
UPDATE 8/31/09
Ok guys, have all four bars sanded down, and 2 of them with some initialy polishing done. So here are a couple shots for your enjoyment!
Through the polishing process, I started with 220grit on my mouse sander to knock off all the paint. Then I grabbed the following grits, 220, 400, 600, 800, 1000 and wet sanded until the previous grits scratches were gone.
Then I hit it with a buffing wheel, and some black oxide polishing compound. I need to do some further polishing, and final polishing still but the above gives you a general idea.