[MaadDaawg]

Quite possibly a more challenging build than even the BattleStar

Built in a Corsair 800D with 2 loops and 3 rads I'm thinking I pulled it off rather nicely and that it looks pretty sharp. Unfortuanately I'm gonna have to tear it down and rebuild it before I can use it due to a glitch in the motherboards matrix .

Built on a Classified 769 ( the 760 with the HC chipset block and an EPC, a 980X and a EVGA GTX 590, this should be a screamer once I square off the mobo issue. For some reason it hangs at 25 on every cold boot, but if you hit the reset it boots right into Windows no probs You can't see it but I mounted a Kryos HT (not sure of the initials) to the CPU (its a big ass chuck of copper through and through) using a Kingpin mounting system cause the one they sell you doesn't work.

Feser Mosta Lite 3x140mm RAD running horizonal on top cools the 590, the EK 2x120 and the Thermochill 1x120 cool the CPU and chipset. Beast is quiet but deadly :

Took a couple pics, as you'll see I used quite a few bitspower snackes, curves, extensions, yada, yada, yada to replace tubing in many places.

I'll post full pics when it's officially completed and setup to the 3 x 27in HD monitors

PS. Each loop has a round DD resv that mounts to the piping on the back above the EK rad. To add fluid I simply need to remove the plug, screw in the resv., and pour not shown in any of these pics. Quick disconnects so the cards and/or CPU and be swapped out easily