DDR3 and P55's - Page 2

Splave · #11 07-18-2010

here are some subs that work good on the classy

Cecil · #12 07-18-2010

I was reading a review on that board earlier, and it said when you manually set timings you have to do ALL sub timings, and do all of them for both channles. Other wise you let it do its SPD thing but it messes up sometimes trying to get the right timings.

Hondacity · #13 07-18-2010

Quote:

Originally Posted by Cecil

I was reading a review on that board earlier,
and it said when you manually set timings you have
to do ALL sub timings, and do all of them for both channles.
Other wise you let it do its SPD thing but it messes up sometimes
trying to get the right timings.

this is what i thought too.... but theoretically you really have to set rams manually

ThreeDhero · #14 07-20-2010

Well I wanted to let my mobo dry out about a week after the DICE session so I went yesterday and went into the bios to set the ram on auto in the bios. Went to reboot and Thought I'd try the OC genie button which I shouldn't have. Whenever using it with the unlocked 655k it seems to get easily confused and won't boot into the bios just keeps restarting. The board has done this ever since I updated the bios to use the CPU unlocking multi feature in bios. Haven't felt like ripping up the clay to reseat the cpu. Last time this happened I had to put my GF's i5 750 in to get back in the bios, seems like I'll have to try that again. This board has it's up's and down's.

Splave · #15 07-20-2010

maybe just an issue of waiting for better bios support for that cpu, thats why I love evga and shammy.

ThreeDhero · #16 07-20-2010

+1

, but I did get the board for $75 vs $300 so it's been doing alright for bot and haven't taking the volts higher than 1.64 Vcore. Might try higher next time since I got the extra 1 year warranty from Micro

Myabe even try to kill the chip

ThreeDhero · #17 07-20-2010

Thought I'd post up results with the first DICE run on this system. I didn't above 1.64 Vcore it be wise to push more Vcore and get more mhz or stay where I'm at and just tweak the ram?

Uploaded with ImageShack.us

Splave · #18 07-20-2010

any way to push the qpi multi up a bit for 32m ? other than that looks awesome

ThreeDhero · #19 07-20-2010

Thanks Splave, I'll have to look into upping the qpi. Just have a lot going on this week with starting a new IT job.
Hope to beat out a few more peeps on Ln2

, only one so far...

Splave · #20 07-20-2010

sweet, good luck on the job mate