[OC Maximus]

Originally Posted by Splave

good stuff bro, you are safe up to 1.55v or so vcore on air I would say

The 3:4 and 1:2 thing is because you need to boot over a certain FSB for the divider to work right. What are the different chips your using?

1. 05' 352 SL96P MALAY L611B071
2. 05' 352 SL96P MALAY L608B392
3. 06' 352 SL9KM CHINA 5648B343
4. 06' 356 SL9KL CHINA 5647B118

__________________________________________________ __________________________________________________

Ok, ran chip #2 again with 1.5v set in bios and got 5.44GHz
http://valid.canardpc.com/show_oc.php?id=1494598

#2 seems like a good clocker so far.

Also ran chip #4 with 1.5v/1.55v/1.6v and got 5.0GHz
http://valid.canardpc.com/show_oc.php?id=1494602

I'm pretty sure its due to the 1:2 issue.

Seems like if I don't boot in with a 200 FSB or above I can't get the 3:4 divider. Chips #3 and #4 will not boot at 200 FSB no mater the voltage on air, maybe they'll do better under cold, for now #2 seems to be the best candidate for an LN2 run.

OCM