[Assassin48]

I found the FAQ and it has to be dual qpi even with single cpu

Unless someone wants to give me a cpu with dual qpi, I'm out lol

FAQ of W555

You can run different models of Dual QPI Xeon together – such as 5520 + 5540, even Quad Core + Hexa Core together – but must be from same family – ie, NO for Westmere + Nehalem – Performance scaling is fine

You can run turbo mode on one CPU and non Turbo Mode on the other too

You can run a single CPU (Must be Dual QPI) in any one of the 2 sockets

You can run Non ECC normal DRAMs but also ECC Rams too

Dual QPI Xeon DRAM Multipliers/Uncore Multipliers are locked so you will only be able to use maximum 2:8 or 2:10 depending on segment of CPU

You can run 200 – 205MHz Baseclocks on air – 230+ needs LN2

Motherboard is 381mm width by 345mm length

Motherboard supports 4-way SLI on current GTX285/upcoming Flagship VGA

Motherboard supports 4-way Quad Fire

Motherboard will ship with typical 1366 Xeon socket back-plates but normal X58 socket back-plates will be bundled in package

Motherboard bundled with ECP V3 – Vcore Boosters + Speedfan 100% Click Boost + CPUs/PCIEs Disable

Power Consumption Tests:

2.8GHz x 2 @ 1.20v w 24 threads Full Load + 12GB Rams + 1x GTX285 Classified Full Load = 535w from AC socket

2.8GHz x 2 @ 1.20v w 24 threads Full Load + 12GB Rams + 4x GTX285 Classified Full Load = 991w from AC socket

4.0GHz x 2 @ 1.30v w 24 threads Full Load + 12GB Rams + 1x GTX285 Classified Full Load = 766w from AC socket
.
4.0GHz x 2 @ 1.30v w 24 threads Full Load + 12GB Rams + 4x GTX285 Classified Full Load = 1,243w from AC socket

4.2GHz x 2 @ 1.40v w 24 threads Full Load + 12GB Rams + 1x GTX285 Classified Full Load = 913w from AC socket

4.2GHz x 2 @ 1.40v w 24 threads Full Load + 12GB Rams + 4x GTX285 Classified Full Load = 1,390w from AC socket