Supes P55 Classified thread - Page 11

Jor-El · #**101** 03-28-2010

What's the magic trick to get this board to run 2:8 ram divider with the i5?

I already tried upping vtt from 1.3 to 1.6max with no luck. Vdimm from 1.60 to 1.76max. I also used Hiwa's 9 and 7 on R to W and W to R.

Also what's the pch volts supposed to help with? I see shamino's template asks us to use a 1.45pch but sometimes I lock when I'm at 1.4pch and it seems to me that system works perfectly fine with 1.1 and high mhzs.

Hondacity · #**102** 03-28-2010

holy smokes your hardware list is awesome...that aside

have you tried the xmp profile? try that first...

Jor-El · #**103** 03-28-2010

Quote:

Originally Posted by Hondacity

holy smokes your hardware list is awesome...that aside

have you tried the xmp profile? try that first...

Hey Honda thanks 'dude'

I'll give that a try. Only thing I don't have is time :-(

Well I finally got the i5 strapped to the Cascade yesterday and I'm finally starting to play with tweaks. PCMark05/wPrime etc just to see the board reactions before the Ln2.

PCMark05 did really well

Teaser:

Hondacity · #**104** 03-28-2010

nice run jor

anyways...see what the xmp profile asks for..then use those values...

Splave · #**105** 03-29-2010

check delays?

http://kingpincooling.com/forum/show...&postcount=109

Splave · #**106** 05-11-2010

resurrected

Been playing p55 for a while today as im out of ln2 and have made some headroom in the Ram department! 2:8 and 2:10 specifically.

Its all in the sub timings. Setting all timings below command rate to 12 and a couple others loosened up a bit (see cpu tweaker screen)

Primary timings are read incorrectly for some reason though, 8 8 8 24 88 set in bios. These settings are superpi 1m stable so far

hope this is helpful as I was really frustrated before as well.

Jor-El · #**107** 05-11-2010

Thanks for sharing that Splave I'm pretty sure I tried it all even settings those to 15-15-15-15-15 but I will give it another go with the cascade and low multi see if I can break that 219blck barrier with 2:8!

Splave · #**108** 05-11-2010

will take some bios photos tonight and post them up

Jor-El · #**109** 06-03-2010

Quote:

Originally Posted by Splave

will take some bios photos tonight and post them up

Splave, Honda, Duke etc what bios are you guys benching with? I stopped on BIOS A58 I think. Just checked eVga website and they climbed all the way up to A70!

Hondacity · #**110** 06-03-2010

i think i'm still using the old bios(a51)..lol i'll try the new one later maybe i'll be able to do 2:10