[MaadDaawg]

another 2 cents

Looks like your going pump rad / gpu / rad / cpu/ resv / pump.

You should really hit the CPU before you hit the GPU. Why not

pump / cpu / rad / rad / GPU / resv / pump

or

pump / RAD / CPU / GPU / RAD / RAD / resv / pump

Either one would shorten the amout of tubing which would increase the flow. That's long single loop. You way should work too, just more burden on the pump.

looks bad ass the way it is though

[MaadDaawg]

Originally Posted by Mr.Scott

Get a haircut kid.

Why, it's WAY shorter than mine

[MaadDaawg]

Originally Posted by Mr.Scott

It's because you have more air than water in your loop. You need to keep tipping the case around and adding more water as the air is expelled. Those rads are still empty.

+1

Just noticed you had some coolant in two of the outside hoses which means it had to have put at least some water throug the rads. Top rad will be the bitch cause it's higher than you resv.

[Mr.Scott]

Originally Posted by MaadDaawg

Why, it's WAY shorter than mine

Mine too.............but todays youth need more "do as I say, not as I do" instituted into them......................you know, the way our parents did with a belt.

[MaadDaawg]

Originally Posted by Mr.Scott

Mine too.............but todays youth need more "do as I say, not as I do" instituted into them......................you know, the way our parents did with a belt.

+1




nusub
Just realized, if you open a port on the resv to fill coolant, you don't need to crack one to drain air Might be your best bet for bleeding though

[kikicoco1334]

Thanks alot guys, I monna be working on this today all day, just got out of traffic school, kinda sucked cuz I really didn't learn anything (all my friends and family already went there and told me about it)

I'll keep you guys posted I already have my camera back as you all can tell.

[Neuromancer]

Not to sound liek a picker of nits, but judging by your phots.. you might want to try plugging it in!!!

LOL

jk...

Yeah totally have to fill, roll case around, fill roll case around...


If you can pull the res out of the back of the bay area (or the front)... do so, lay the case on the rads (carefully) then you can leave teh res open why you fill and bleed.

I like using extra tubing too, prevents kinking and also allows you to move stuff around when necessary.

I thought my hair was long, it actually touches my ears now!

[MaadDaawg]

I have a ponytail

[kikicoco1334]

I AM ABOUT TO SIT THIS SHIT ON FUCKING FIRE RIGHT NOW

For the last 3 hrs, I been trying to find out why in the fuck is this pos motherboard don't wanna boot when it's in a case. when I take it out it works fine, as soon as i put it in the case NOT SHIT WORKS

It shows it's got power, and will try to start for a half sec then nothing

At first i though there was a short somewhere and i pretty much taped a layer of shit on the bottom of the board and this motherfucker still ain't booting i am about to just take it out side have a meeting with me and my gun

[kikicoco1334]

Now this board WILL NOT BOOT at all if there is a cpu in there