[punx223]

so by vcore your saying add .320?

if so i will try those out... im beginning to wonder if maybe it just doesnt like this 3x1 gb set... theyre elpida hyper 2000 mhz cas 8 but i cannot get them to run 2000 cas 9

I can get them to run 1600 cas 7

as for uncore ive been keeping it double of my dram.

ive heard the deal with the odd multi.... should i try running turbo at 20X for a 21x multi or 19x multi? even whne setting 19x multi, when i enable turbo i do see it still sets a 21x multi for turbo.

[Neuromancer]

Here is another sweet overclock, if your motherboard will be capable:

Bclock = 200

920 = x18-20 = 3600-4000 mhz (within safe vcore limits, air coolable)
940 = x18-22 = 3600-4400 mhz (vcore at limits for >4000, only water coolable)

200 Bclock x18 QPI = 3600 mhz > 7.2 G/s (motherboard better have balls for this)
200 Bclock x16 Uncore = 3200 mhz (good for DDR3-1600, raise VTT at own risk for more)

Guess it was the QPI/VTT voltage I saw about passing 220 Bclcok.

Interesting to note the comment made on the QPI speed.

Check the number of phases your mobo supplies for VTT, it uses 30W at STOCK. Some mobos are pushing 4 phases for this at least 2 would be necessary i think.

Dunno if I have a messed up bios or not, I set 21x multi on mine and hit 4.2 pretty easily, never saw it drop to 4GHz for wprime either...(tried 4 8 and 16 threads in wp also, 8 works best 2 seconds faster than 4 threads, 16 threads was .5 seconds slower than 8 threads)
4.2 WAS NOT STABLE THOUGH, found out I was running my mem at almost 2000 MHz LOL at 1.65 volts :p not bad for $50 tri channel ram

[punx223]

Originally Posted by Neuromancer

Guess it was the QPI/VTT voltage I saw about passing 220 Bclcok.

Interesting to note the comment made on the QPI speed.

Check the number of phases your mobo supplies for VTT, it uses 30W at STOCK. Some mobos are pushing 4 phases for this at least 2 would be necessary i think.

Dunno if I have a messed up bios or not, I set 21x multi on mine and hit 4.2 pretty easily, never saw it drop to 4GHz for wprime either...(tried 4 8 and 16 threads in wp also, 8 works best 2 seconds faster than 4 threads, 16 threads was .5 seconds slower than 8 threads)
4.2 WAS NOT STABLE THOUGH, found out I was running my mem at almost 2000 MHz LOL at 1.65 volts :p not bad for $50 tri channel ram

hmmm tahts quite interesting... i will be looking into this for sure... maybe im just being volt happy enough i guess?

[Gunslinger]

With a D0 1.3-1.4V on the VTT should be plenty.

And stick with odd multi's when clocking, they seem to be much more stable than even numbers.

[DrNip]

I have looked but couldn't find what mobo you are running? I saw you make reference to MSI but there was no confirmation on you using one.

[punx223]

Originally Posted by DrNip

I have looked but couldn't find what mobo you are running? I saw you make reference to MSI but there was no confirmation on you using one.

I am presently on the EX58-UD5


i was on the DFI but its sitting right now as it doesnt seem to like the D0... then again it is pending flash to the BETA bios, which i have seen good things about.