[69_Goat]

Here is the DL link:

http://downloads.guru3d.com/MSI-Afte...load-2410.html

[Kal-EL]

1. Go to installed directory of MSI Afterburner, default: C:\Program file\MSI Afterburner
2. Use notepad to edit “MSIAfterburner.cfg”
3. Change the parameter of “EnableUnofficialOverclocking” from “0” to “1”.

disable_ccc_limits.jpgDirect from MSI
Sometimes GURU3D adds junk files and google bars to their shit.

[Neuromancer]

Dunno about the new cards, the new afterburner limited me to 1.35 Volts. I use riva with config and Volterra plugin to jam up to 1.45v through my 4890 , then Afterburner for OCing.

Oh and when ever I make an adjustment to Core/mem I have to adjust fan speed too or it drops back to "stock" (still reads whatever I had set it to previously)

[lakeside2189]

I am going to load the MSI today..I did load the new GPU-Z and it finally shows the speed I have on the card...940/1265..No voltage yet but I'm getting there!!!

[Kal-EL]

Nice

[lakeside2189]

Downloaded the MSI software and it is easier to use and more effective than asus's...
First try with 3D06 and running 4.525 thanks to the 69_goat's OCing advice!!

[DrNip]

I couldn't stand DrMos or whatever the Asus software was called.

[lakeside2189]

Not only does the MSI program help with voltage tweak but allows a larger core and memory clock than the ATI CCC or the Asus program... 1005/1311

I caught Kal!!!!

[2chesapeakes]

Originally Posted by lakeside2189

Not only does the MSI program help with voltage tweak but allows a larger core and memory clock than the ATI CCC or the Asus program... 1005/1311

I caught Kal!!!!

Here is another score for you to beat.
MB - R2E
Single 5870 @ 1060 GPU 1050 MEM.
CPU 191.5 x 21 = 4021Mhz
RAM 1522 8-8-8-21-1T tRFC60

Link 20,511

[Kal-EL]

Yep and with less gpu clocks too. Good Job!