20x Linx Stable i920 HT runs

Cecil · #1 07-22-2009

Lets see some.

Ive got 4.2HT as my "sweetspot". Lowered every voltage as much as possible, and tightened everytiming as much as they would go.

920 D0 - 4200Mhz - 1600Mhz - 8-8-7-21 - 1.33VCore - 1.265VTT - 1.6VDimm - Auto everything else - Water - 35C/74C

Working on more.

2chesapeakes · #2 07-22-2009

I tried running this on my R2E with the 965 all settings stock. Instant blue screen every time. Don't know if I had a setting messed up or what but gave up.

Chuchnit · #3 07-23-2009

I'll try and get one for ya tonight Cecil. I ran 5 passes easy at 4198mhz 1.28vcore loaded. Memory needs work though so I'll be spending my time on that.

69_Goat · #4 07-23-2009

Here's a run I did recently

920 C0 - 4000Mhz - 1600Mhz - 9-9-9-24 - 1.35VCore - 1.318VTT - 1.66VDimm - 1.86CPU/PLL - Auto everything else - Water - 25C/82C

If I had a Rad in my cooling loop, my temp delta wouldn't have been so wide.

With better control of temps I could get a 4200 Mhz pass. I was 70 min. into a run and got an error.

hellcamino · #5 07-23-2009

Quote:

Originally Posted by 2chesapeakes

I tried running this on my R2E with the 965 all settings stock. Instant blue screen every time. Don't know if I had a setting messed up or what but gave up.

That means you are unstable as hell Jeff...LOL! Good thing you aren't benching it at stock!

Cecil · #6 07-23-2009

Got 4.3HT now, working on some more.

920 D0 - 4300Mhz - 1640Mhz - 8-8-8-24 - 1.3875VCore - 1.325VTT - 1.6VDimm - Auto everything else - Water - 36C/83C

Cecil · #7 07-24-2009

920 D0 - 4405Mhz - 12600Mhz - 8-8-8-24 - 1.5VCore - 1.5VTT - 1.6VDimm - Auto everything else - Water - 40C/89C

Still working on this one a bit.

DrNip · #8 07-24-2009

Nice 4.45 run but ouch with the volts and temps!! Can you get the volts any lower?

Cecil · #9 07-24-2009

Quote:

Originally Posted by DrNip

Nice 4.45 run but ouch with the volts and temps!! Can you get the volts any lower?

Working on it. I spent about 5 hours trying to get it stable, then said screw it and pushed them all too high.

Chicken Patty · #10 09-07-2009

Quote:

Originally Posted by Cecil

Lets see some.

Ive got 4.2HT as my "sweetspot". Lowered every voltage as much as possible, and tightened everytiming as much as they would go.

920 D0 - 4200Mhz - 1600Mhz - 8-8-7-21 - 1.33VCore - 1.265VTT - 1.6VDimm - Auto everything else - Water - 35C/74C

Working on more.

very nice man. You sure you can't get your vcore down more? Here is mine.
This was tested also few hours of prime and went on to crunch about another day and a half at those settings.