"1) Green wire: can go to the middle leg or an outer leg of the VR. doesn't matter. Connect the other leg to a ground. I used the ground on the fan header you see on the lower left of your picture.
2) Black and white: Connect one wire to the middle leg and the other wire to the the outer leg of your VR. doesn't matter which goes to which. Neither of them connects to a ground. No ground is necessary in this mod. All this mod does is add your VR in parallel to the existing resistor."
Which of the cabels from the fan header is ground?2510?
__________________
slipping the clutch
|
acebook
Threaded Mode