[Buckeye]

Well that will be able to strap onto any hold down kit, just 2 screws is all you need and a hold down plate.

So any Phase/Cascade wil be able to use this.

But with new CPU's and higher heat loads I decided to make it a 400watt tester so tunning for higher loads will be easyer.

I can tell you right now that at 4.0ghz a 965 C3 is pushing 300watts (for the whole computer), 4.2ghz and your over 300watts. So picture a 5.3ghz chip on Cascade and what heat load that is.