[Splave]

I know right? remember the overclock mode has mode 1 and 2 and auto. We asked the bios engineer and he had no clue it was even there.

[GFDuke]

Any specific changes with the new bios that you know of?

[Splave]

not quite sure what they changed

[Hondacity]

xxxxxxxxxxxxxx

Note - Uncore setting will now scale with BCLK settings when set to Auto. Manual settings will be required when running BCLKs over 220 to ensure stability and improved BCLK rates.

Note - LN2 Modes might need to be adjusted to improve cold clocking capabilities. Auto = LN2 mode 2, setting to LN2 Mode 1 will result in potentially better overclocking below -140C. This is dependent upon CPU quality and cooling.

[Splave]

good lookin out honda

[Jor-El]

My cpu liked 704 better.

"Note - Uncore setting will now scale with BCLK settings when set to Auto. Manual settings will be required when running BCLKs over 220 to ensure stability and improved BCLK rates.

Note - LN2 Modes might need to be adjusted to improve cold clocking capabilities. Auto = LN2 mode 2, setting to LN2 Mode 1 will result in potentially better overclocking below -140C. This is dependent upon CPU quality and cooling. "

Wish I had one that would get that cold. On my second GT now both 3003B and 3005F CBugged around -110 to -113 I can barely bench at those temps.

Will have to try a 3rd time

[Hondacity]

did you try only 2 sticks of ram?

cb is somehow affected by ram....

ram voltage.....steponz is using 1.8v+ on his gtx2....lmao...it seems to help
ram channels....we used channel 2 and channel 3...and it sorta removes cb

[Jor-El]

Originally Posted by Hondacity

did you try only 2 sticks of ram?

cb is somehow affected by ram....

ram voltage.....steponz is using 1.8v+ on his gtx2....lmao...it seems to help
ram channels....we used channel 2 and channel 3...and it sorta removes cb

Yep I tried 1x2x&3x no luck ram doesn't help my CB only my CBB. Tried all BIOSes too.

I don't wanna kill my good old i5 ram's (GSkill perfect storm) w/ 1.9vdimm they are rare I might try with my new sticks.

After a certain vdimm I'm sure they will throw errors.

[Hondacity]

we tried slot 2 and slot 3.(4gb)...no cb

[Jor-El]

Originally Posted by Hondacity

we tried slot 2 and slot 3.(4gb)...no cb

Will give that a shot only tried 1&2... (closest to the cpu and the middle slot).

Does S.pi32m lose a lot of performance from triple channel to dual channel?