Now the motherboard(mainboard) is ready to come out, you need to pull it up from the narrow side first(CPU side last) and sorta twist it a lil bit. WALA no mo mainboard......
Next remove the HSF from the motherboard with three scews, im here to replace the FAN for the CPU but I'll do the TIM'S while I'm here. as you can see in the photos the factory GOPS it on there, so much so i'm surprised it didn't short out(unless its none conductive)!
You all know what to do here, clean and remove old TIM'S with 90% Alcohol. Watch your fingers as I've gotten tims on them then touched the wrong thing and poof no more powa!!
I used a old tooth brush dipped in the alcohol to remove anything around the chips surrounding the CPU,also did the GPU as well same way.
__________________
Quote:
Originally Posted by Splave
I always had 75% full pucker of my asshole from fear of it possibly harming my chip  |
Last edited by PhIlLy ChEeSe; 03-26-2013 at 07:18 AM.
Reason: add photos missing
|
acebook
Threaded Mode