Chiller's Hybrid SR-2 in Level 11 mod - Page 11

HybridChiller · #**101** 12-29-2010

show me some temps and OC of your SR-2

steponz · #**102** 12-29-2010

I was going to put it on LN2, but I am going to test the card for Heaven.. So I can keep it on Air for now.. Tomorrow is LN2.

What program would you like me to use for compare? I plan on removing all of the sinks and replacing the underneath with paste, but haven't done it yet. Last time I checked the pwm near CPU0 gets really hot on air..

I have 2 x X5680's for reference.

HybridChiller · #**103** 12-29-2010

that's why i putted the mobo on WC TEC, because 1 pwm gets hotter then the other one, strange ,
but other people reacted also like this with an SR-2

just the temps with Eleet tuner idle and load and cpuZ with what cpu's on what speed,
so i can compare

steponz · #**104** 12-29-2010

Sure thing.. will be on air for now.. then I will do LN2 tomorrow.. Ill take some screenshots to compare.

HybridChiller · #**105** 12-29-2010

thanks

steponz · #**106** 12-29-2010

What would you like to use for load testing?
I'll likely do 4 ghz clocks and would like to keep the stress on the CPUs to a minimum.

HybridChiller · #**107** 12-29-2010

doesn't matter, just whant to see your temps

steponz · #**108** 12-29-2010

Got ya... will do.. stay tuned

steponz · #**109** 12-31-2010

Here you go chill... stock and then oc'd on air to 4ghz.. hit 4.3ghz...

On load the pwm would hit up in the 70's with more vcore..

For LN2 I took off the heatsink and replaced the crappy thermal pads with ocz freeze..

When I fire it up with LN2, Ill put the same clocks to see what the temps are... most likely much better... Really makes me wonder why they shortcutted with that crappy heatsink and pads....

HybridChiller · #**110** 12-31-2010

i have good experience with the aftermarket heatpads, they are darkgrey of color, and of strange structure.

i always used them on every motherboard i had, also between the heatsinks of the dominator memory.

so i used them now also with the koolance full cover block on the motherboard together with artic ceramic on the chips.
So i'm very curious when i power my rig up what temps i will have on the PWM.

therefor i collect screens of temps of other users to compare with my rig, because my motherboard and cpu's will be on chilled liquid.

and thanks a lot for the temp screens