[Hondacity]

oh sheet ..chipset is watercooled

umm is that the northbridge?

i need your address btw...

[ny_driver]

I think the chipset is like NB......I'm certainly no expert though. I took an old GPU block I had and it fits in there perfectly, well actually much larger than the chipset but there is JUST enough room for it.

PMing you now.

[ny_driver]

Originally Posted by Hondacity

oh sheet ..chipset is watercooled

umm is that the northbridge?

i need your address btw...

The cpu is cooled by the coolant in the chiller directly flowing through the water-block. And the chipset/gpu loop is also cooled by the chiller but to a lesser degree by having the loop just pass through the chiller bath. I get no condensation that way.
The gpu stays a little below ambient and the chipset right @ ambient which is 21.5C right now.

Pretty smart eh?

[Hondacity]

well if thats the nb for the amd...you'll surely push the fsb higher...awesome work..looks clean too..

i only use 3/8ID tubes now..they're smaller and cheaper...and easier to route..

[ny_driver]

Thanks alot. I pride myself in my rig looking pretty neat and unique....the bench definitely needs a paint job though. I tie up all the cables with waxed nylon lacing cord. The stuff rules if you know how to tiie a knot or two. It's how I attached the chipset block too. I'm just re-using a blue garden hose that I drove over the threads on.

I'm going to figure out how to untint my camera today dammit!

FSB seems to be limited to about 370ish on this board no matter what I adjust. I have seen some very high FSB on other DFI LP NF4 boards, but haven't tested the FSB on the others yet. It's on my list though.

[Hondacity]

what is max vnb? maybe we can ask our mod specialists to have a look at your board and recommend mods...

[ny_driver]

If by vnb you mean chipset voltage it goes up to 1.96v, and the LDT voltage goes up to 1.5v.......and the memory and vcore go as high as you could want.

The board is DFI LP UT NF4 SLI-DR Expert. I also have a regular SLI-DR and an Ultra-D I'd be glad to have modded.

EDIT/UPDATE: I gained 500 points in PCMark05 with the gpu @ 16x, not enough for the next spot on any of the 4 chips so screw it.

[Neuromancer]

Originally Posted by ny_driver

If by vnb you mean chipset voltage it goes up to 1.96v, and the LDT voltage goes up to 1.5v.......and the memory and vcore go as high as you could want.

The board is DFI LP UT NF4 SLI-DR Expert. I also have a regular SLI-DR and an Ultra-D I'd be glad to have modded.

EDIT/UPDATE: I gained 500 points in PCMark05 with the gpu @ 16x, not enough for the next spot on any of the 4 chips so screw it.

Are you forcing 3D clocks? Not sure how to do it on ATI and it seems like all the top pc05ers are running ATI....

[ny_driver]

Nope not forcing anything other than Ocing the core and voltage with afterburner.

[Neuromancer]

Quick search shows using profiles. Create and save a profile, and then open up the XML file and change all want_0 settings to 3D values.