[Dimas]

Hello Guys, i'm Andrea, alias Dimas on forums, i was mostly a phase change builded in the past, but i decide to make also benchtables time ago, i did some experiments, some research, and what i'm about to show it's the last project we finish...
we have also some other good product related to overclockers incoming, like watercooling parts and new Phase Change coolers, but here we will show our New Test Station, i'd like to thank Kal for inviting me here, for sharing the develop, the process and if possible for you guys to suggest new ideas, are always welcome...

let's go on...
Here Below the Final Revision of Table Easy V2.5, this is the Standard Version, no customization, all the accessory like USB cable, FlexFan or other things are adding parts

Bench Table Easy V2.5 Specifications
-Single Model available, this model will cover all the old V2 versions
-Tipical U bend shape, 90 degrees round corner
-down tray now have a sledge and the fasteners are thumbscrews
-positioning of the support for optical and Hd on Slot, not just on holes
-lateral customization with the name of the product "DimasTech V2.5"
-Compatibility with all the radiators on market(hwlabs, thermochill, tfc, ecc...ecc...)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-4 hard disk support, 3,5"
-3 optical drive , 5,25"
-new slot for cable passing
-custom cut on the back saying "MADE IN ITALY"
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Hard V2.5
-4 back holes for water cooling tube passing or for waterccoling fittings
-new Power On and Reset Button "P" and "R" with red and black shrink cables
-USB front Port for Single Pen Drive, very usefull for saving screenshots and no boring about find the Rear USB ports (USB Cable is an Accessory)
-Male - Female spacers, no more need of screw for the motherboard Spacers
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5 (more news on this accessories in next week)
-XL-ATX vga support available as accessory (10 slots)



Hardware Assembled Air Cooling, Only USB CABLE accessory



Soon to be available PDF mounting GUIDE


Bench Table Hard V2.5 Specifications
-Single Model available, this model will cover all the old V2 versions and perfect matching the new Bench Table Easy V2.5 ( bench Table Easy + Bench Table Hard = EasyHard bench Table)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-new slot for cable passing
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Easy V2.5
-redesigned Arch-Press to be more easy to fix and easy to screw pots or other cooling device to CPU
-Male - Female spacers, no more need of screw for the motherboard Spacers
-Bachelite Handles
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5
-XL-ATX vga support available as accessory (10 slots)



Hardware Assembled Air Cooling, No Accessory



PDF mounting guide for that table too

From the Fusion of Bench Table Easy and Bench Table Hard, born EasyHard, this 2 bench tables can be used together or separate, it perfectly match through rubber feet and special screw on the top of Bench Table Easy, with that setup the Hard Bench Table can't move in any direction, like the older bench table.

Bench Table EasyHard V2.5 Specifications
hard part
-Single Model available, this model will cover all the old V2 versions and perfect matching the new Bench Table Easy V2.5 ( bench Table Easy + Bench Table Hard = EasyHard bench Table)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-new slot for cable passing
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Easy V2.5
-redesigned Arch-Press to be more easy to fix and easy to screw pots or other cooling device to CPU
-Male - Female spacers, no more need of screw for the motherboard Spacers
-Bachelite Handles
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5
-XL-ATX vga support available as accessory (10 slots)
easy part
Bench Table Easy V2.5 Specifications
-Single Model available, this model will cover all the old V2 versions
-Tipical U bend shape, 90 degrees round corner
-down tray now have a sledge and the fasteners are thumbscrews
-positioning of the support for optical and Hd on Slot, not just on holes
-lateral customization with the name of the product "DimasTech V2.5"
-Compatibility with all the radiators on market(hwlabs, thermochill, tfc, ecc...ecc...)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-4 hard disk support, 3,5"
-3 optical drive , 5,25"
-new slot for cable passing
-custom cut on the back saying "MADE IN ITALY"
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Hard V2.5
-4 back holes for water cooling tube passing or for waterccoling fittings
-new Power On and Reset Button "P" and "R" with red and black shrink cables
-USB front Port for Single Pen Drive, very usefull for saving screenshots and no boring about find the Rear USB ports (USB Cable is an Accessory)
-Male - Female spacers, no more need of screw for the motherboard Spacers
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5 (more news on this accessories in next week)
-XL-ATX vga support available as accessory (10 slots)




Hardware Assembled Air Cooling, No Accessory, only Usb Cable for Easy Part